Hioki 9010-50 Clamp On Probe


Hioki 9010-50 Clamp On Probe Hioki Model 9010-50	$240.00

Simply connect to a tester or recorder to easily measure large currents

For more accurate waveform recordings and analysis of harmonic signals, etc.

Basic specifications (Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times)

	9132-50	9010-50
Rated current	AC 20/50/100/200/500/1000 A	AC 10/20/50/100/200/500 A
Accuracy	±3% rdg. ±0.2% f.s. (45 to 66Hz)	±2% rdg. ±1% f.s. (45 to 66Hz)
Frequency characteristics	Add to amplitude accuracy for frequencies from 40 to 1kHz: ± 1% rdg.	Add to amplitude accuracy for frequencies from 40 to 1kHz: ±6% rdg. (at 10A and 20A range) ±3% rdg. (for 50A range and above)
Output rate	0.2V AC f.s. (f.s.=setting rage) (Connect to a voltage input device providing a high input impedance of 1MΩ)
Max. current input	(For 40Hz to500 Hz: 100%, and for 500Hz to 1kHz: within 90% of derating) 1000Arms continuous (all ranges)	(For 40Hz to 100Hz: 100%, and for 100Hz to 1kHz: within 50% of derating) 150Arms continuous (10/20/50A ranges) 400Arms continuous (100/200A ranges) 650Arms continuous (500A range)
Max. circuit voltage	600Vrms (Insulated conductor)	600Vrms (Insulated conductor)
Diameter	Ø 55mm(2.17in), or 20mm(0.79in) × 80mm(3.15in) busbar	Ø 46mm(1.81in)
Dimensions, mass	100mm(3.94in)W × 224mm(8.82in)H × 35mm(1.38in)D, 600g(21.2oz), cord length: 3m(9.84ft)	78mm(3.07in)W × 188mm(7.40in)H × 35mm(1.38in)D, 420g(14.8oz), cord length: 3m(9.84ft)

Qty: