SymCom SOLUTIONS-M SOLUTIONS-M SYMCOM SOLUTIONS-M SOFTWARE

Home > Parts/Accessories > SymCom SOLUTIONS-M SYMCOM SOLUTIONS-M SOFTWARE


SymCom SOLUTIONS-M SYMCOM SOLUTIONS-M SOFTWARE SymCom Model SOLUTIONS-M	$399.00

SYMCOM Solutions-M Software communicates using the MODBUS-RTU and MODBUS-TCP protocols. Network Features/Functions: The software provides the ability to create and configure multiple MODBUS networks, with each network having its own set of communications settings. Provides the ability to adjust the following communications parameters for a MODBUS-RTU network:

name of the serial port

baud rate at which the network communicates (9600 or 19200)

data bits expected with each packet received (0-10)

parity (none/even/odd/stop)

stop bits at the end of each received message (0-2)

message timeout: amount of time spent waiting for a message response (300 ms – 1000 ms)

message retries: number of times a message is resent after a timeout occurs (0 – 3)

The software provides the ability to adjust the following communications parameters for a MODBUS-TCP network:

IP address for a MODBUS gateway

TCP port used

message timeout: amount of time spent waiting for a message response (300 ms – 1000 ms)

message retries: number of times a message is resent after a timeout occurs (0 – 3)

The software provides the ability to add devices to the network by one of the following methods:

automatic detection

manual addition

The software provides the ability to detect faulted devices on a network. The software shall display detailed fault information including:

The time and date of the fault

The type of fault that has occurred

The node address of the device that has faulted

The software shall provide the ability to monitor and log real-time data.

The software shall provide the ability to view and configure settable parameters for devices.

The software shall be able to import device library files.

The software shall provide the ability to synchronize a device’s internal clock with the computer’s clock (if applicable to device).

The software shall provide the ability to save and reopen networks.

The software also provides the ability to read events, past faults, and pending faults from a device (if applicable to device) along with the following associated data:

Date/time of event or fault

Name of event or fault

The MODBUS address at which the event or fault was received

The software shall be able to control and/or monitor inputs and outputs for devices (i.e. the fault relay on a SymCom 777).

Specifications

Qty: